@Kampfer - I really like the future-shifted gods, my only criticism would be font related. Some of them seem squashed to fit the space. I would like to see what they look like in a slightly-smaller font size, not squashed...mostly the lines reading Legendary Enchantment Creature. There also seems to be a smaller gray outline to some of the body fonts, which gives them the effect of being slightly blurred.
This one was just screaming to be done for the lulz.
Hey guys, sorry I'm not contributing anything but I wanted to know if there was a way to search this thread specifically, rather than sort through 151*10 + posts.
Hey guys, sorry I'm not contributing anything but I wanted to know if there was a way to search this thread specifically, rather than sort through 151*10 + posts.
Thank you.
Scroll up to the top of the page, and inside the blue bar at the very top of the posts you'll see a "search this thread" dropdown.
Here's a try at Nylea in a new "printer friendly" frame I'm working on.
Hey thanks man. I found some good ones already, and I'm working on some custom ones now.
I just had a quick question though about a specific template. http://www.mediafire.com/download/q72drdtq1ews213/Unhinged_Lands_HQ.psd
I'm using the template in that link to try and create a plains with custom artwork. However, the 'border' layer is a solid layer of black. What am I supposed to do to to get the artwork in the middle, just select the section with the artwork and delete?
Edit: Oops, never mind. I just did the logical thing and deleted the overspill.
Holy crap, he is not doing anything to hide the fact that these are counterfeit cards, and all but uses the term while at the same time calling them "actual MTG cards". Staggering.
Holy crap, he is not doing anything to hide the fact that these are counterfeit cards, and all but uses the term while at the same time calling them "actual MTG cards". Staggering.
But you don't UNDERSTAND, he uses A LOT of BOLD, underlined, CAPS LOCKED WORDS, so you must be wrong and he MUST be right.
In other news, dude's reported by me at least :tongue:.
But you don't UNDERSTAND, he uses A LOT of BOLD, underlined, CAPS LOCKED WORDS, so you must be wrong and he MUST be right.
In other news, dude's reported by me at least :tongue:.
What I can't believe is some of the bids he's getting. Force of Will past $50, a few others around $35. Its one thing if he was actually "altering" the actual same named card with an overlay, but its quite obvious something else is happening....and people are eating it up.
@willows: I like the simplicity of your printer-friendlys, very clean looking, nice enchantment bar on the left. well done.
Been working on a version of full-art lands that are somewhere in between Unhinged and Zendikar. There is enough space in the mana box for two mana symbols to support duals. Here is an example for each of the land types and a shockland.
Would love to hear ideas/crits.
Stupid question but what is the font code for making higher than 9cc cost colorless cards? Trying to do an alter for Emrakul and for the life of my I can't seem to either find anything that explains how to make his mana cost or figure it out on my own. I'm using Photoshop and the 2008 Mtg Mana Symbol font.
Been working on a version of full-art lands that are somewhere in between Unhinged and Zendikar. There is enough space in the mana box for two mana symbols to support duals. Here is an example for each of the land types and a shockland.
Would love to hear ideas/crits.
Stupid question but what is the font code for making higher than 9cc cost colorless cards? Trying to do an alter for Emrakul and for the life of my I can't seem to either find anything that explains how to make his mana cost or figure it out on my own. I'm using Photoshop and the 2008 Mtg Mana Symbol font.
You can use two layers for this:
o on layer 1,
15 with -500 tracking on top of it.
What I can't believe is some of the bids he's getting. Force of Will past $50, a few others around $35. Its one thing if he was actually "altering" the actual same named card with an overlay, but its quite obvious something else is happening....and people are eating it up.
@willows: I like the simplicity of your printer-friendlys, very clean looking, nice enchantment bar on the left. well done.
Nylea, God of the Hunt:
Your Nylea and Thassa are great! Any chance you're getting around to the others? I could really use Purphoros in this style with his original artwork.
How do you report this? I posted the original thread, and thank you for letting others know.
On the listing page of each item there is a link to report the item. You may have to have an account to report it. There is a selection for counterfeit, etc. The more people that report the better chance the items will get taken down, he's got quite a few up there.
How do you report this? I posted the original thread, and thank you for letting others know.
one of the worst thing is , they don't even acknowledge to the original artists.
Really bad.
@Narb777
I really like the way you do to combine those images like this into one newly made picture. ( I mean the gods you did ). May I ask how to make them in Photoshop please? I mean the steps and which function keys I should choose.
Really want to learn that skills.
@Narb777
I really like the way you do to combine those images like this into one newly made picture. ( I mean the gods you did ). May I ask how to make them in Photoshop please? I mean the steps and which function keys I should choose.
Really want to learn that skills.
Thanks in advance.:)
Thanks....What i did in those was just use masking. On the first layer I had the figure and in the layer above I placed the star image then made it not visible. On the image of the figure I used the magic wand with a tolerance of around 40-80 to get a selection (adjust based on the results you get), the desired effect is to select the darker areas. Once I had an area I liked, I chose the select similar option under the select menu. After that I saved the selection just in case I messed it up. Next step was to feather the selection by 10-20 pixels (again adjust and undo based on how it turns out). Make the star layer above visible and add a layer mask to it using the selection that was created, the option should say "reveal selection", then just clean up the mask using feathered brushes and adjust the layer to the opacity you are looking for.
Been working on a version of full-art lands that are somewhere in between Unhinged and Zendikar. There is enough space in the mana box for two mana symbols to support duals. Here is an example for each of the land types and a shockland.
Would love to hear ideas/crits.
Those are just lovely. I especially love the forest and Island.
How do you report this? I posted the original thread, and thank you for letting others know.
Another way to report is directly to Wizards. I send the link to [email]ipagent@wizards.com[/email] in hopes that they can shut down these asshats. One of the people I reported to wizards who goes by the name etcady on ebay had a ton of full art stickered foil PW up yesterday and now he/she has pulled all their sales.
EDIT: Here is another one that needs shutdown: Sexy Alt Art. I already reported it to wizards so we need to just report to ebay.
This user has two Jace listed that are clearly counterfeit.
Another user with a bunch of foil sticker cards that use copyrighted art. Reported to wizards This guy even has a facebook page and purports to be a "small business owner". It really makes me sick thinking about it.
Thanks....What i did in those was just use masking. On the first layer I had the figure and in the layer above I placed the star image then made it not visible. On the image of the figure I used the magic wand with a tolerance of around 40-80 to get a selection (adjust based on the results you get), the desired effect is to select the darker areas. Once I had an area I liked, I chose the select similar option under the select menu. After that I saved the selection just in case I messed it up. Next step was to feather the selection by 10-20 pixels (again adjust and undo based on how it turns out). Make the star layer above visible and add a layer mask to it using the selection that was created, the option should say "reveal selection", then just clean up the mask using feathered brushes and adjust the layer to the opacity you are looking for.
Happy to help.
Thanks for your reply. It seems to be a little bit complicated to make it but I will try later.
Love the art look, but the way his ability is worded seems to imply that he has to be a creature to have the whenever ability. Not sure if there is room in there to give it its own line though.
Purphoros
This one was just screaming to be done for the lulz.
Hundred-Handed One
Thank you.
Here's a try at Nylea in a new "printer friendly" frame I'm working on.
I just had a quick question though about a specific template.
http://www.mediafire.com/download/q72drdtq1ews213/Unhinged_Lands_HQ.psd
I'm using the template in that link to try and create a plains with custom artwork. However, the 'border' layer is a solid layer of black. What am I supposed to do to to get the artwork in the middle, just select the section with the artwork and delete?
Edit: Oops, never mind. I just did the logical thing and deleted the overspill.
Thassa, God of the Sea
Also saw this in another thread:
Ebay shenanigans to be reported capncader
http://www.ebay.com/sch/capncader/m.html?item=151113752921&rt=nc&_trksid=p2047675.l2562
Holy crap, he is not doing anything to hide the fact that these are counterfeit cards, and all but uses the term while at the same time calling them "actual MTG cards". Staggering.
Reprint Opt for Modern!!
FREE DIG THOROUGH TIME!
PLAY MORE ROUGE DECKS!
Nice! Both look great with the font changes
But you don't UNDERSTAND, he uses A LOT of BOLD, underlined, CAPS LOCKED WORDS, so you must be wrong and he MUST be right.
In other news, dude's reported by me at least :tongue:.
What I can't believe is some of the bids he's getting. Force of Will past $50, a few others around $35. Its one thing if he was actually "altering" the actual same named card with an overlay, but its quite obvious something else is happening....and people are eating it up.
@willows: I like the simplicity of your printer-friendlys, very clean looking, nice enchantment bar on the left. well done.
Nylea, God of the Hunt:
Reprint Opt for Modern!!
FREE DIG THOROUGH TIME!
PLAY MORE ROUGE DECKS!
Would love to hear ideas/crits.
Plains:
Forest:
Island:
Mountain:
Swamp:
Temple Garden:
You can use two layers for this:
o on layer 1,
15 with -500 tracking on top of it.
@Willow: Thanks!
Your Nylea and Thassa are great! Any chance you're getting around to the others? I could really use Purphoros in this style with his original artwork.
How do you report this? I posted the original thread, and thank you for letting others know.
On the listing page of each item there is a link to report the item. You may have to have an account to report it. There is a selection for counterfeit, etc. The more people that report the better chance the items will get taken down, he's got quite a few up there.
Purphoros, God of the Forge:
one of the worst thing is , they don't even acknowledge to the original artists.
Really bad.
@Narb777
I really like the way you do to combine those images like this into one newly made picture. ( I mean the gods you did ). May I ask how to make them in Photoshop please? I mean the steps and which function keys I should choose.
Really want to learn that skills.
Thanks in advance.:)
Thanks....What i did in those was just use masking. On the first layer I had the figure and in the layer above I placed the star image then made it not visible. On the image of the figure I used the magic wand with a tolerance of around 40-80 to get a selection (adjust based on the results you get), the desired effect is to select the darker areas. Once I had an area I liked, I chose the select similar option under the select menu. After that I saved the selection just in case I messed it up. Next step was to feather the selection by 10-20 pixels (again adjust and undo based on how it turns out). Make the star layer above visible and add a layer mask to it using the selection that was created, the option should say "reveal selection", then just clean up the mask using feathered brushes and adjust the layer to the opacity you are looking for.
Happy to help.
Those are just lovely. I especially love the forest and Island.
Another way to report is directly to Wizards. I send the link to [email]ipagent@wizards.com[/email] in hopes that they can shut down these asshats. One of the people I reported to wizards who goes by the name etcady on ebay had a ton of full art stickered foil PW up yesterday and now he/she has pulled all their sales.
EDIT: Here is another one that needs shutdown: Sexy Alt Art. I already reported it to wizards so we need to just report to ebay.
This user has two Jace listed that are clearly counterfeit.
Another user with a bunch of foil sticker cards that use copyrighted art. Reported to wizards This guy even has a facebook page and purports to be a "small business owner". It really makes me sick thinking about it.
Reprint Opt for Modern!!
FREE DIG THOROUGH TIME!
PLAY MORE ROUGE DECKS!
Thanks for your reply. It seems to be a little bit complicated to make it but I will try later.
Love the art look, but the way his ability is worded seems to imply that he has to be a creature to have the whenever ability. Not sure if there is room in there to give it its own line though.
EDH Decks:
B Toshiro Umezawa B
W Mikaeus, the Lunarch W
G Azusa, Lost but Seeking G
UB Grimgrin, Corpse-Born BU
BGU The Mimeoplasm UGB
GUW Rubinia Soulsinger WUG
GRB Sek'Kuar, Deathkeeper BRG