Quote from Aznopiumfrom what i have heard, there has been a rather noticeable difference in the quality (/quality control) of the new (100 ct) sleeves vs. the 80 ct sleeves.
i know the quality of the KMC 100's, i am bit fearful of getting the KMC 80's.
yeah i can get a box of kmc matte 80's (10x packs of 80, so 800) for 45 shipped.
i also need like 1100 sleeves, so i still need to get a few more packages if i get that. I rather just get 11x packs of 100 and call it a day.
Quote from bondafongWell - i've ordered 800 Super Green KMC recently. I've combined them with a couple of 100-packs I had. I can't make the difference. There was however 1 sleeve too few in one of the packs.
Quote from PhantizleWas Necropotence the gateway drug of choice here?
Yes. A thousand times yes. They lured me in with Ivory Tower and Zuran Orb, and I kept telling myself "I can quit whenever I want...just look at that untapped disk". That was ten years ago man.....
(puts face in hands and weeps)
Was Necropotence the gateway drug of choice here?
Quote from Zerin KaramoffI'm in the final stages of foiling my cube. As many of you are aware it's pauper cube. While there's only a handful of kinda valuable cards (N/M foil USL Rancor, N/M Alpha Prodigal Sorcerer and Terror, etc...) would the benefits of KMC+Perfect Fits outweight the cost?
I use the cube weekly and shuffle pretty hard. I have the very cheap Ultra-Pro sleeves and they are splitting on the bottom constantly. I need to upgrade my sleeves sooner or later (probably sooner) but if I need to do it I want to do it right this second time around.
Quote from wtwlf123For those that use them, KMC sleeves + KMC perfects are the way to go? Do you put the cards in the perfects upside-down and then put them into the sleeves that way? (It doesn't seem worth double-sleeving unless you have them in the perfects upside-down, to protect the tops of the cards?)
Quote from Aznopiumfrom what i know, that would be correct metholdology for double-sleeving.
(pefects upside down to proctect the top portion of the card from protruding_
I think pringles sent a link to someone showing you how to do it correctly. (not that this is hard to do, lol)
Quote from iceage4lifeNo it's not.
Quote from wtwlf123It's not the correct methodology, or it's not that hard to do? You didn't specify what part of his post you were referring to.
Quote from Miscalcul8edRiskThe only thing I will say about Perfect Fits as a disclaimer to those wanting to use them is that they will produce an air pocket in your sleeves, but not to fret it will work its way out after some use. You can also expedite the process by working it out yourself with some patience.
Altarus: The perfect fits will work with Dragonshields, yes, but they won't be as snug as KMC. I hope the Dshields work out for you better than they did for me. I too bought like 700 (brown) but when they came in, they were different lengths from box to box, with a max deviation of just over 1/8". As a result, the cube would have a tendency to develop clumps after shuffling. It got so bad that I had to replace them with KMCs which are always cut to precisely the same length. My incident aside, Dragonshields are far and a way the superior sleeve imo.
Quote from Altaurus321Crap lol, now I'm getting scared I just wasted $60+
Quote from Miscalcul8edRiskWhen you get your Rook case in would you be able/willing to take some pics of the inside and post them? I've been interested in ordering one myself but I was holding off in case the dividers were all wacky or something.
Quote from Altaurus321Yah man for sure. It'll be about 2 1/2 weeks though... As far as the dividers go, wtwlf is right. Mine just has one going down the center (metal) that divides it into two 360 sleeved card rows or 500 unsleeved card rows. Does anyone who has the case know if the divider is fitted tightly into the case (as in "sealed" at the end of the divider) so cards don't mix into the different sections?